Motor support when trailering

Anything and everything related to boating, motors, and electronic equipment. Find out the answers to your questions here.
Post Reply
User avatar
OntarioRider
Bronze Participant
Bronze Participant
Posts: 145
Joined: Fri Apr 01, 2005 7:03 am
Location: Osgoode, Ontario

Motor support when trailering

Post by OntarioRider »

Which do you use?
Transom saver or a lock-n-haul or Motor Stick type systems?
What are your opinions and/or experiences?
User avatar
jsdx
Bronze Participant
Bronze Participant
Posts: 397
Joined: Sat Nov 16, 2002 11:56 am
Location: Ottawa
Contact:

Re: Motor support when trailering

Post by jsdx »

I used a transom saver on my princecraft 176, 90hp.

Works great but have some tips...

1) the connector to the trailer was one of those pin with ball bearings. Eventually it rusted and the pin would not stay. Needless to say I sharpened my transom saver that day the pin popped out and I dragged it around. Now I have a pin with clip that won't come off.
2) I use a bungee from the saver around the motor to keep the transom saver from coming loose in a bounce. Don't forget on those really rough roads or your saver can pop off.
User avatar
toobinator
Gold Participant
Gold Participant
Posts: 1354
Joined: Thu Nov 07, 2002 10:50 pm
Location: Winchester Ont.
Contact:

Re: Motor support when trailering

Post by toobinator »

I use the Motor Mate on the Ranger. I find it keeps the motor locked in better than the transom saver type. I have used the transom saver though and really not sure which one is better.

Ed
Save a bass. Eat a chicken
User avatar
StarTzar
Silver Participant
Silver Participant
Posts: 972
Joined: Fri May 10, 2013 8:17 pm

Re: Motor support when trailering

Post by StarTzar »

I use a Motormate on my Ranger Z118, Evinrude 150hp.
Very easy to use and it locks everything in place.
Here is a short video that shows how to install the motormate.

BAA - 2016 Team 18 (10 shy of 28)
Renegade Bass - 2013 Team 67 - 2014 Team 28 - 2015 Team 51
BAA (Great organization) 2011 and 2012 Team 7
User avatar
NMG
Bronze Participant
Bronze Participant
Posts: 159
Joined: Thu May 16, 2013 4:33 pm

Re: Motor support when trailering

Post by NMG »

I use a traditional transom saver and it's worked just fine, no issues. My motor is pretty light though (260 lbs.) so it really won't put as much stress on the unit as a larger outboard would.
User avatar
OntarioRider
Bronze Participant
Bronze Participant
Posts: 145
Joined: Fri Apr 01, 2005 7:03 am
Location: Osgoode, Ontario

Re: Motor support when trailering

Post by OntarioRider »

Thank you for your experience.
I recently purchased a 2002 Lund with a Yamaha VMAX 150.
Before next season I want to purchase either a transom saver or something like the motormate.
User avatar
loophole
Participant
Participant
Posts: 58
Joined: Sat Mar 28, 2009 8:36 am
Location: Carleton Place

Re: Motor support when trailering

Post by loophole »

This is something I've been meaning to ask about. I have a Legend boat with a Mercury 50. I don't trailer it much though. It goes to the lake in the early summer and home at the end of September. So nothing really gets bounced around much. I assume that I have no real need for a transom saver, given the little amount of time the boat spends on a trailer. Also, should the motor be tight to the transom when I'm trailering or backed off a bit?
User avatar
muskie_magnet
Participant
Participant
Posts: 56
Joined: Thu Sep 24, 2009 6:26 am
Location: Orleans

Re: Motor support when trailering

Post by muskie_magnet »

Did you purchase the motormate in Canada? They don't list any Canadian distributors on the web site.
User avatar
StarTzar
Silver Participant
Silver Participant
Posts: 972
Joined: Fri May 10, 2013 8:17 pm

Re: Motor support when trailering

Post by StarTzar »

muskie_magnet wrote:Did you purchase the motormate in Canada? They don't list any Canadian distributors on the web site.

I purchased my motormate at Orleans Boat World.
BAA - 2016 Team 18 (10 shy of 28)
Renegade Bass - 2013 Team 67 - 2014 Team 28 - 2015 Team 51
BAA (Great organization) 2011 and 2012 Team 7
User avatar
OntarioRider
Bronze Participant
Bronze Participant
Posts: 145
Joined: Fri Apr 01, 2005 7:03 am
Location: Osgoode, Ontario

Re: Motor support when trailering

Post by OntarioRider »

I purchased my motormate at Orleans Boat World.
That is great information! Thanks.
User avatar
muskie_magnet
Participant
Participant
Posts: 56
Joined: Thu Sep 24, 2009 6:26 am
Location: Orleans

Re: Motor support when trailering

Post by muskie_magnet »

I talked with the yesterday - they sell for $135.00
User avatar
lape0019
Gold Participant
Gold Participant
Posts: 1817
Joined: Fri May 10, 2013 8:54 am

Re: Motor support when trailering

Post by lape0019 »

loophole wrote:This is something I've been meaning to ask about. I have a Legend boat with a Mercury 50. I don't trailer it much though. It goes to the lake in the early summer and home at the end of September. So nothing really gets bounced around much. I assume that I have no real need for a transom saver, given the little amount of time the boat spends on a trailer. Also, should the motor be tight to the transom when I'm trailering or backed off a bit?

It never really hurts to have one but if you are able to tow with the motor vertical instead of on an angle, it really isn't needed. If you need clearence between the ground and your skeg, it allows you to tow with the motor raised a bit while still supporting it to something else. Mine attaches to the trailer so if I hit a bump, the motor doesn't move. The purpose of a transom saver is to ensure that the transom doesn't flex back and forth. If the motor is vertical, most of the force would be taken at the top of the transom pushing down while if the motor is on an angle, it would act like a cantilever and apply force to the back of stern portion instead of the top of the transom resulting in flex which would weaken it.

Adam
Post Reply